Wildview Xtreme 3 - Burst and Full Mode Settings

STC-TGL3M
www.wildviewcam.com Toll Free 888-304-6125
12
• Burst: To set number of picture the camera will take
per PIR triggering
o 1P: Single image capturing per PIR triggering
o 2P: Two images continuous capturing per PIR
triggering
o 3P: Three images continuous capturing per PIR
triggering
o AVI: 10 seconds video clip per PIR triggering
• FULL: When memory capacity is full, this front LCD
screen will show “FULL”