Wilfa e-way E-250 MAX - Error Description

4.4 Error Description
Display Defect Description Solutions
E0 Wrong in
communication
1. Check whether the display control board
is well connected.
2. Replace the display.
3. Replace the control board.
E1 Encountered
obstacles which
E-scooter can’t get
over
1. Release the accelerator and stop braking.
2. Restart.
3. Replace the brake lever.
4. Replace the accelerator.
E3 Hall is abnormal 1. Check whether the Hall wire plug of the
motor is loose.
2. Check whether the motor cable is
damaged.
3. Replace the motor.
4. Replace the control board.
E4 Brake system
malfunction
1. Release the brake.
2. Restart.
3. Replace the brake lever.
E5 Throttle fault 1. Release the accelerator.
2. Restart.
3. Replace the accelerator.
5