5.2 Charging
The device has a built-in lithium battery, no extra battery installation is
required, just charge the device when it indicates low battery.
Plug in the power source after inserting the charger plug, this can prevent
potential risk to ensure a safer charge.
It takes around 3hrs to get 100% charged, when the red lights turn into green,
the charging is completed. If not in urgent need, please wait until charging is
complete before unplugging.
6. Cleaning and Maintenance
6.1 Cleaning
• Please place the E-scooter in cool and ventilate places to release heat.
• Please avoid high temperature or moist.
• Please avoid water into the E-scooter to prevent electric shock,
especially water drops from the charger cable to the the charging port.
When cleaning
•
• Please use soft cloth to clean the E-scooter.
• Please don’t use water to wash the E-scooter or place E-scooter in water.
9
To Next Page
Loading...
