12
EN
INSTRUCTION MANUAL · HUMIDIFIER
TROUBLESHOOTING
Problem Possible reasons Solutions
Power lamp is off
when switched on.
Humidier is not
plugged in.
Plug the humidier into a
powered electrical socket.
Power cord is damaged. Immediately discontinue
use and contact Customer
Support.
Humidier is defective
or malfunctioning.
Press the power button to turn
it on.
Power lamp is on
when switched on,
but no mist come
out.
Humidier is not turned
on.
Press the power button to turn
it on.
The target humidity is
reached.
Increase the target humidity or
change mode.
Water shortage
indicator is on.
No water in the tank. Rell the water tank wait at
least 1 minute.
Water level is low.
The water level required
has not yet reached
the vaporization
compartment.
Wait at least 1 minute.
The water tank isn’t well
positioned.
Check the positioning of tank
on the base.
The humidier isn’t on a
at surface
Check the positioning of the
humidier.
Humidier
produces an
unusual smell
Humidier is new. Take out water tank, open
cover, let it stay 12 hours in
cool position.
Dirty water or water
sitting too long.
Clean water tank, ll with clear
water.
Residual smell from
diffusing aroma oil on
the aroma cotton.
Remove the aroma cotton,
rinse it under clean water and
allow it to dry.
To Next Page
Loading...
