Wilfa ICE-12S - Troubleshooting

11
EN
ICE CUBE MAKER · ICE-12S
TROUBLESHOOTING
Problem Possible reasons Solutions
The “Add Water”
indicater is on
Lack of water
.
Stop the ice cube maker, ll
water and press the “ON/
OFF” button again to start the
unit.
“Ice Full” is on The ice basket is full. Remove ice from the ice
basket.
Ice cubes are stuck
together
The ice cube cycle is too
long.
Stop the ice cube maker,
restart it when the ice cubes
have melted. Select the
smallest ice cube size.
The water temperature
in the internal container
is too low.
Replace the water.
The recommended water
temperature is 8-32 °C.
The ice cube cycle
is normal, but no
ice is being made
The room temperature
or water temperature in
the internal container is
too high.
The room temperature
should be 1043 °C, the water
temperature should be 8 to
32 °C.
Cooling system leak. Must be checked by a qualied
technician.
The copper pipe to
the cooling system is
blocked.
Must be checked by a qualied
technician.