English
9
USE
• Put usable cooking utensils in the middle of the plate and plug in the
appliance.
• As soon as the appliance is plugged in, a beep sounds, «OFF» appears on
the display and the internal fan is started.
• Switch the appliance on with a light fingertip press on the on-off switch
«ON» appears on the display.
• Start the induction cooking plate with a press on the “POWER” key, 1600
appears on the display as standard default for the power. Press up or down
to choose between the power settings.
• Press the «TEMP» key to switch to the temperature indication, which is
standing on maximum value 240°C. Press up or down to choose between
the temperature settings.
• Press the «TIMER» key – 0:00 appears on the display. Press up or down to
set the time; by continuously pressing the + button or - button you can
increase or reduce the operating time in 5-minute intervals. However, if you
do not press up or down, no time limit is set.
Usable pans
Steel or cast iron, enameled iron, stainless steel, flat-bottom pans/pots with
diameter from 12 to 26 cm.
Non-usable pans
Heat-resistant glass, ceramic container, copper, aluminum pans/pots rounded-
bottom pans/pots with bottom measuring less than 12 cm.
Overheating protection
The induction cooking plate is equipped with an overheating protection.
If your cooking plate overheats (empty pot or pan), a prolonged beep will
sound. After a few minutes the cooking function will switch off automatically.
If you take the pot or pan from the plate during use, a beep will sound as well,
and the lamps will flash as a warning. Always switch off the appliance first before
taking away the pot or pan.
To Next Page
Loading...
