EasyManua.ls Logo

Wilfa Lillehammer 9 - WORKING TEMPERATURE RANGE

Wilfa Lillehammer 9
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
English
The appliance must be positioned so that the plug is accessible.
All wires of indoor unit and outdoor unit should be connected by a
professional.
If the length of power connection wire is insufficient, please contact the
supplier for a new one. Avoid extending the wire by yourself.
For the air conditioner with plug,the plug should be reachable after finishing
installation.
For the air conditioner without plug, an circuit break must be installed in the
line.
If you need to relocate the air conditioner to another place, only the
qualified person can perform the work. Otherwise, it may cause personal
injury or damage.
Select a location which is out of reach for children and far away from animals
or plants. If it is unavoidable, please add the fence for safety purpose.
The indoor unit should be installed close to the wall
WORKING TEMPERATURE RANGE
Note: The operating temperature range (outdoor temperature) for cooling is -15°C~43°C; Heating temperature range
for the model without electric heating belt for chassis is -15°C~24°C. Heating temperature range for the model with
electric heating belt for chassis is -25°C~24°C .
Indoor side DB/WB(°C) Outdoor side DB/WB(°C)
Maximum cooling 32/23 43/26
Maximum heating 27/- 24/18

Table of Contents