Wilfa MG-1600 - Using the Hot Dog Feature; Using Both Features Simultaneously

49
Using the hot dog feature
1. Assemble the unit with the grill plate and drip cup in proper position. Slide
kabob drawer out and place the drip trays in the kebab drawers and slide
drawers into place. Turn the control dial to desired temperature and preheat
for approximately 10 to 12 minutes.
2. Assemble the kebab skewers and hot dog rollers by slipping
the skewer through the holes in each end of the hot dog roller
cap and give it a slight turn to lock it in place. Be careful not
to turn too far (see figure P).
3. Place the skewer with hot dog roller onto the skewer slot so
that the star like shape at the handle end of the skewer is
inserted into the gear slot in the front end of the kebab drawer.
(see figures P, Q).
4. Using tongs, position the hot dogs in between two of the hot
dog rollers. Four hot dogs will fit on each of the drawers. Slide
the drawer back into place.
5. Please note: Whether using the grill/griddle plate or not, you must always
have it in place when just using the kebab feature. Please keep in mind that it
is very hot when the unit is operating.
Using both kebab and grill or griddle feature simultaneously
1. You may use both cooking methods simultaneously. Just follow the assembly
instructions on page 3 for flipping the grill/ griddle plate and the instructions
above for using the kebab and hot dog features.