EasyManua.ls Logo

Wilfa SM-1 - How to Use the Stick Mixer

Wilfa SM-1
44 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
8
HOW TO USE THE STICK MIXER
The handblender is perfectly suited for preparing dips, sauces, soups, mayonnaise and
baby food as well as for mixing and milkshakes.
1. Turn the plastic or stainless steel blender stick on the motor unit until it locks.
2. Introduce the hand blender in the vessel. Then choose speed “1”-“5” or press the
switch I or switch II to operate it.
3. Turn the blender stick off the motor unit after use.
4. You can use the hand blender in the measuring beaker and just as well in any other
vessel.
5. Use the handblender for no longer than 1 minute
6. Caution:the blade is very sharp!
How to use the chopper
Chopper is perfectly suited for hard food, such as chopping meat, cheese, onion, herbs,
garlic, carrots, walnuts, almonds, prunes etc. Don’t chop extremely hard food, such as ice
cubes, nutmeg, coffee beans and grains.
Before chopping:
1. Carefully remove the plastic cover from the blade. Caution: the blade is very sharp!
Always hold it by the upper plastic part.
2. Place the blade on the center pin of the chopper bowl. Press down the blade and
lock bowl. Always place the chopper bowl on the anti-slip base.
3. Place the food in the chopper bowl.
4. Place the chopping bowl lid on the chopper bowl.
5. Turn the motor unit on the chopping bowl lid until it locks.
6. Choose switch II to operate the chopper. During processing, hold the motor unit with
on hand and the chopper bowl the other.
7. After use, turn the motor unit off the chopping bowl lid.
8. Then remove the chopping bowl lid. carefully take out the blade.
9. Remove the processed food from the chopper bowl.

Other manuals for Wilfa SM-1

Related product manuals