Wilhelmsen Ships UNTIOR HPC 54/1 User Manual

OPERATIONAL EFFICIENCY
EN DE FR
UNITOR INSTRUCTION MANUAL
UNTIOR HPC 54/1, 67/1

Wilhelmsen Ships UNTIOR HPC 54/1 Specifications

General

Brand	Wilhelmsen Ships
Model	UNTIOR HPC 54/1
Category	Pressure Washer
Language	English

Summary

1 Important Safety Instructions

For Your Own Safety

Emphasizes user training and authorized operation for safety.

General

Before Starting the Cleaner

Outlines pre-operation checks like plug, cord, and voltage.

Electrical Equipment

Warns against spraying electricals and ensures correct plug connection.

Maintenance and Repair

Advises on safe maintenance practices and using original spare parts.

Testing

2 Description

2.2 Purpose

2.3 Operating Elements

Lists and illustrates all the components of the high-pressure cleaner.

3 Before Starting the Cleaner

3.1 Setting Up the Cleaner

Guides on unfolding, locking the handle, and initial checks.

3.2 Check the Oil Level

3.4 Connecting the High Pressure Hose

3.5 Connecting the Water Supply

3.6 Electrical Connection

Covers voltage checks, cord reel usage, plug connection, and cable release procedure.

3.7 BA Valve

4 Control / Operation

4.1 Connecting the Spray Lance to the Spray Gun

4.2 Switching on the Cleaner when it is connected to a Water Supply

Guides on operating the main switch and spray gun for startup.

4.2.1 Switching on the Cleaner when it is connected to open tanks in suction mode (Pressure activated model)

4.2.2 Switching on the Cleaner when it is connected to open tanks in suction mode (Flow activated model)

4.5 Using Cleaning Agents

4.6 Lifting with Crane

6 After Using the Cleaner

6.1 Switching off the Cleaner

6.2 Disconnecting Supply Lines

6.5 Storing the Cleaner (Below 0°C)

7 Maintenance

7.1 Maintenance Plan

Presents a schedule for weekly, initial, and periodic maintenance tasks.

7.2 Maintenance Work

8 Troubleshooting

Pressure Drop

Lists causes and remedies for reduced pressure during operation.

Pressure Fluctuations

Identifies reasons for pressure fluctuations and their solutions.

The Motor Does Not Start When the Cleaner is Switched On

Provides troubleshooting steps for a non-starting motor.

When the Cleaner is Switched On the Motor Buzzes Without Starting

Addresses issues where the motor buzzes but doesn't run.

The Motor Switches Off

Explains why the motor might switch off unexpectedly and how to resolve it.

9 Further Information

9.4 Technical Data

Lists detailed technical specifications for the HPC models.