Need help?Do you have a question about the Williams Sound pocketalker 2.0 and is the answer not in the manual?
General| Type | Personal Amplifier |
|---|---|
| Battery Life | Up to 200 hours |
| Gain | Up to 50 dB |
| Output | 3.5 mm headphone jack |
| Volume Control | Yes |
| Tone Control | Yes |
| Power Source | 2 AAA batteries |
| Output Power | Up to 120 dB |
| Input | 3.5 mm audio jack |
| Frequency Response | 100 Hz to 10 kHz |
| Maximum Output | 120 dB |
| Battery Type | AAA |
| Accessories Included | 2 AAA batteries |
Details how to open the battery cover and insert batteries correctly.
Explains the headphone/earphone jack location and usage.
Describes how to adjust the balance control for optimal audio output.
Details how to turn on the device and adjust volume using the rotary dial.
Describes how to use the T-coil feature with hearing loop systems.
Details the T-coil switch and its indicator LED on the device.
Lists critical safety precautions to follow during battery charging.
Step-by-step guide on how to recharge the NiMH batteries using the charging kit.
Illustrates the connection process for charging the Pocketalker 2.0.
Advice for positioning the device when seated in quiet or group settings.
Guidance on using the clip or lanyard for portability while moving.
Recommendations for using an external microphone in a vehicle.
Details the process of connecting the external microphone with an extension cord.
Step-by-step guide on how to wear and connect the neckloop.
Provides visual steps for attaching the lanyard to the Pocketalker.
Verifies microphone, headphone, T-Coil, and battery connections/settings.
Addresses battery charge levels, polarity, and charging settings.
Guides on managing feedback, adjusting volume, tone, and earphone balance.
Interpreting LED indicators and seeking dealer support.
To Next Page
