Williams Sound PPA VP User Manual

Personal PA
™
Value Pack System
Wide-Band FM Wireless Listening System
Transmitter Model PPA T27
Receiver Model R35
QUICK SETUP GUIDE
MFRM 010A
Model PPA VP

Williams Sound PPA VP Specifications

General

Brand	Williams Sound
Model	PPA VP
Category	Hearing Aid
Language	English

Summary

SYSTEM OVERVIEW

SETTING UP THE PPA VP

SELECT LOCATION

Position the PPA T27 transmitter near the sound system or mixer.

INSTALL THE ANTENNA

Thread the rubber duckie antenna onto the stud on the transmitter.

CONNECT THE POWER

Connect the power supply cord to the transmitter and AC outlet.

SELECT THE FREQUENCY

Change and lock the transmitter frequency via selector buttons.

CONNECT THE AUDIO SOURCE

Connect line-level or microphone audio source to the T27.

ADJUST THE AUDIO LEVEL

Set audio level using the 'Adjust' control and LED indicator.

LISTEN WITH AN FM RECEIVER

Connect receiver batteries, earphone, and tune to transmitter frequency.

PPA R35 RECEIVER INSTRUCTIONS

BATTERY INSTALLATION

Install AA/NiMH batteries, set switch, observe polarity.

CONNECTING EARPHONES

Plug monophonic earphones into the 'EAR' jack.

OPERATING THE RECEIVER

Turn on receiver, adjust volume, and turn off.

PPA R35 FREQUENCY CHANGE INSTRUCTIONS

TO CHANGE THE FREQUENCY

Step-by-step guide to tune the receiver's internal tuning coil.

IMPORTANT NOTICE: INTERFERENCE RESTRICTIONS

FIVE YEAR WARRANTY REGISTRATION