Attaching the Piano to the Stand
Place the piano on the stand. Align the circular
holes on the side board brackets with the holes
on the body. Insert the screw knobs into the
holes and fasten.
NOTE: Do not tighten the screw knobs until
all screw knobs have been inserted.
Assemble the Cross Board
5. Place the cross board brackets on the cross board and fasten with 4X12 screws.
Assemble the Piano Stand
6. Align the circular holes on the end of the cross board assembly with the right and left stand leg assembly.
7. Insert the M6X30 screws into the holes and fasten.
To Previous Page
Loading...