ENGLISH
12
WILLIAMSJETTENDERS.COM
@
Indicates seating position
@
Indicates handholds
1 Lifting Points
2 Towing valve (under engine hatch)
3 Throttle/shift control
4 Fuel Filler (under front cushion)
5 Engine instrumentation
6 Drain Bungs
7 Hull Indentification Number (HIN)
(on transom)
8
CE Plate
9 Tube Inflation Valves
10 Waterski bridle attachment points
CAUTION.
Towing weight limit is 70kg
General Layout
Consult your Rotax engine operator’s manual.
A break-in period of 10 hours is required
before continuous operation at full throttle.
To achieve a good break-in, a maximum of
3
/4 throttle should be observed, however, brief
acceleration and speed variations contribute
to a good break-in. Williams suggest that after
the first 10 hours of operation, the engine be
checked by an authorized BRP/JPS ROTAX
marine engine dealer.
The break-in period is very important and
must not be neglected.
New Engine Break-in Period
1010
66
3
4
99
8
5
99
1
11
@
@@
@ @
@
@@
@@
2
7
To Next Page
Loading...
Need help?
General