Williams Symphony User Manual

Laying the Pedal Cable
Take off the cable slot cover. Lay in
the pedal cable from the pedal crossbar,
then insert the cover.
Tools required: phillips screwdriver
Ten M6X20 screws
Four M6X15 screws Six 4X16 self-tapping screws
Two 4X12 self-tapping screws
Cross Bar Installation
Attach the pedal crossbar to the leg
with the M6X20 screws.
Check the Package Contents
Assembly

Williams Symphony Specifications

General

Brand	Williams
Model	Symphony
Category	Racks & Stands
Language	English

Summary

Check Package Contents

Assembly Steps

Laying the Pedal Cable

Lay the pedal cable in the slot, connecting it to the pedal crossbar, then replace the cover.

Cross Bar Installation

Attach the pedal crossbar to the leg using the M6X20 screws.

Backboard and Final Assembly

Backboard Installation

Attach the backboard to the legs using M6X15 and 4X16 screws.

Final Piano Installation

Mount the piano body onto the stand using M6x20 screws and install the headphone holder.

Power Supply Connection

Connect the power cord to the piano's bottom receptacle and the AC wall outlet.