16
keep your milk container clean
❏ Rinse immediately under running water for at least 1 minute.
❏ Soak in warm, soapy water for a minimum of 5 minutes (use mild
dishwashing soap, and agitate while they soak).
❏ Use the Large Cleaning Brush from your Willow Pump Kit to clean
(wash for at least 60 seconds, minimum 30 seconds of brushing).
Use the Small Cleaning Brush to clean the Insert spout.
❏ Rinse with hot water for at least 50 seconds.
❏ Place parts on clean paper towels or a drying rack to air dry.
After each use, wash your Container and Insert in the dishwasher
(top rack only) or follow the instructions below!
See any signs of milk after cleaning? Repeat the steps above.
To Next Page
Loading...
