EasyManua.ls Logo

WillowWood ONE - Page 5

WillowWood ONE
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
WEEKLY DISINFECTING
Place a small amount of ethyl or isopropyl alcohol on a soft, clean cloth. Lightly wipe
the side of the liner without the logo with the cloth for two minutes.
Rinse the alcohol from the liner with water.
Place the liner on the Drying Stand so that the side with the logo is on the outside.
Note: Do not soak the liner in the ethyl or isopropyl alcohol. Soaking the liner in
alcohol will stiffen the liner.
side with
the logo
If the silicone part of the One Sleeve touches your skin, it will need to be disinfected. Once a week, disinfect
the area of the silicone that touches the skin.
1. Place a small amount of ethyl or isopropyl alcohol on a soft, clean cloth.
2. Lightly wipe the silicone with the cloth.
3. Rinse off the alcohol with water.
Note: Do not soak the sleeve in the ethyl or isopropyl alcohol. Soaking the sleeve in alcohol will stiffen
the sleeve.
Liner
Sleeve
b
c
a