Need help?Do you have a question about the Wilo Yonos Para RS 25/6 and is the answer not in the manual?
Lists the components of the mixing unit.
Technical specifications of the mixing unit.
Hydraulic diagram for regulation units and circulator.
How to install the mixing units.
Installing the thermostatic head with probe.
Setting the maximum temperature limit.
Procedures for testing and filling the system.
Example system sizing and fixed point regulation procedure.
Adjusting project temperature using thermostatic head.
Steps to replace the circulator.
Steps to replace the thermostatic head.
Commissioning procedures for the circulator.
Troubleshooting guide for circulator issues.
CE conformity declaration for the circulator.
Description of the adjustable thermostat.
How to adjust the thermostat's intervention temperature.
Specifications for the safety thermostat.
List of standards the thermostat complies with.
Important safety guidelines before installation or connection.
Instructions for installing the safety thermostat.
To Next Page
General