Need help?Do you have a question about the Wilson Benesch Arc and is the answer not in the manual?
General| Brand | Wilson Benesch |
|---|---|
| Model | Arc |
| Category | Speakers |
| Language | English |
Instructions for returning the Guarantee Registration Card or using electronic registration within two weeks of purchase.
Highlights the long-term relationship and the five-year guarantee on Odyssey Range loudspeakers.
Describes the high-quality support from the dealer network for advice on cables, room sighting, and upgrades.
Advises on needing assistance, correct lifting posture, using gloves, and removing jewelry before unpacking.
Explains how room contents like hard/soft surfaces affect acoustic energy reflection, absorption, and diffusion.
Defines standing waves as resonance modes from parallel walls that cause distortions and frequency response issues.
Discusses the impact of power delivery and cable quality on sound performance, recommending system separation.
Emphasizes no objective criteria for positioning, advocating for gradual adjustments and owner preference.
Provides guidance on speaker placement relative to TVs and optimal angles for home cinema environments.
Details how to adjust speaker toe-in and position using spikes for optimal sound alignment.
Warns about strong magnets in drive units and keeping sensitive electronics and medical devices away.
Recommends 8mm connector types and advises against over-tightening speaker terminals.
Explains the essential 70-hour run-in period for drivers and cabinet to achieve optimal performance.
Provides guidance on cleaning and maintaining carbon fibre and wood veneer finishes.
States unauthorized adjustments void guarantees; outlines upgrade procedures via authorized dealers.
Lists the specific loudspeaker models within the Odyssey Series: Arc, Centre, Curve, Discovery, Chimera, and Act.
Details the Arc speaker's 2-way design, Tactic drive units, soft dome tweeter, and double reflex port tuning.
Specifies the Arc's frequency range (-6dB at 42Hz/30kHz, -3dB at 45Hz/25kHz) and sensitivity (88dB).
Lists the Arc's impedance (6 Ohms nominal) and crossover details (first-order mid-range, second-order tweeter at 5kHz).
Describes Arc's bi-wireable terminals, internal wiring, power handling (200W peak), and maximum SPL (111dB).
Provides dimensions (H:310mm, W:230mm, D:370mm), weight (10kg), and available finishes for the Arc speaker.
Details the Centre's 2.5-way design, Isobaric bass units, Tactic bass/mid, and soft dome tweeter.
Specifies the Centre's frequency range (-6dB at 40Hz/30kHz, -3dB at 43Hz/25kHz) and impedance (6 Ohms nominal).
Lists the Centre's crossover frequencies (500Hz/5kHz) and internal wiring details.
Provides Centre's power handling (200W peak), max SPL (111dB), weight (10kg), and dimensions (H:310mm/700mm).
Lists the available polymer and wood finishes for the Centre speaker, including stand options.
Details the Curve's ACT Monocoque technology, Tactic drive units, and Bessel alignment.
Specifies the Curve's frequency range (-6dB at 32Hz/30kHz, -3dB at 35Hz/25kHz) and response (35Hz-24kHz).
Lists the Curve's impedance (6 Ohms nominal) and crossover (500Hz/5kHz) details.
Provides Curve's power handling (200W peak), max SPL (109dB), weight (26kg), and dimensions (H:910mm, W:230mm, D:370mm).
Lists the available polymer and wood finishes for the Curve speaker.
Details the Discovery's 2.5-way design, Isobaric bass units, Tactic bass/mid, and tweeter.
Specifies the Discovery's frequency range (-6dB at 38Hz/30kHz, -3dB at 42Hz/25kHz) and response (45Hz-24kHz).
Lists the Discovery's impedance (6 Ohms nominal) and crossover (500Hz/5kHz) details.
Provides Discovery's power handling (200W peak), max SPL (110dB), weight (26kg), and dimensions (H:1100mm).
Lists the available polymer and wood finishes for the Discovery speaker, including stand options.
Details the Chimera's 2.5-way design, four Isobaric bass units, Tactic bass/mid, and tweeter.
Specifies the Chimera's frequency range (-6dB at 25Hz/30kHz, -3dB at 34Hz/25kHz) and response (36Hz-24kHz).
Lists the Chimera's impedance (4 Ohms nominal) and crossover (500Hz/5kHz) details.
Provides Chimera's power handling (200W peak), max SPL (111dB), weight (70kg), and dimensions (H:1420mm).
Lists the available polymer and wood finishes for the Chimera speaker, noting carbon fibre top.
Discusses carbon composite cabinetry, U section design, and alloy baffle construction for driver proximity.
Highlights changes to Tactic drive unit mass, coil, and diaphragm for better control and dynamics.
Explains crossover placement in the cabinet spine and the shift to bi-wiring.
Details the redeveloped porting for mid-range and bass, minimizing noise and rear wall reflection effects.
Describes the A.C.T. speaker's aesthetic, contemporary design, build quality, and extensive finish options.
Highlights the A.C.T. One's stable pricing, technological leadership, and industry acclaim.
Compares the new A.C.T. sound to electrostatics, noting enhanced dynamism, accuracy, and presence.
Details the A.C.T. floorstanding monitor's 2.5-way design, Tactic drive units, and Bessel alignment.
Specifies A.C.T.'s frequency range (-6dB at 32Hz/30kHz, -3dB at 35Hz/25kHz) and response (35Hz-24kHz).
Lists A.C.T.'s impedance (6 Ohms nominal) and crossover (500Hz/5kHz) details.
Provides A.C.T.'s power handling (200W peak), max SPL (111dB), weight (44kg), and dimensions (H:1080mm).
Lists available polymer and wood finishes for the A.C.T., noting specific top finishes for different types.
To Next Page
