EasyManua.ls Logo

Wilson Benesch Square One Series ii User Manual

Default Icon
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
owners manual
Question and Answer IconNeed help?

Do you have a question about the Wilson Benesch Square One Series ii and is the answer not in the manual?

Wilson Benesch Square One Series ii Specifications

General IconGeneral
BrandWilson Benesch
ModelSquare One Series ii
CategorySpeakers
LanguageEnglish

Summary

To the Owner

To the Music Connoisseur

Unpacking & Set-up Instruction

Loudspeaker Spikes Handling

Handle loudspeaker spikes with care, inserting them before placing the speaker to protect the drive system.

Protective Wrap Handling

Handle the protective speaker wrap carefully due to slipperiness and retain packaging for safe shipping.

Room Acoustics

Adjustable Room Attributes

Room contents like hard surfaces and curtains affect acoustic character by reflecting or absorbing sound.

Understanding Standing Waves

Standing waves are created by sound wave reflections between parallel surfaces causing distortions.

Mid and High Frequency Characteristics

Room contents influence mid/high frequencies by reflecting, absorbing, or diffusing acoustic energy.

Acoustic Energy Behavior

Describes reflection, diffusion, and absorption of acoustic energy by room surfaces.

Two Channel Loudspeaker Positioning

Speaker Placement Testing

Select four musical passages for testing speaker performance, including voice, orchestra, emotional, and rhythmic pieces.

Cinema Systems

CRT Display Proximity

Tactic II drive units are unshielded; place speakers at least 1m from CRT displays, angled 110-130°.

Bi Amping

Bi Wiring

Terminals

Speaker Spike Installation

Spike Adjustment

Install spikes before lifting the speaker, adjust toe/rake angle with assistance, tilt tweeter for specific seating.

Magnet Precautions

Running In Time (70 hours)

Surface Finish

Other Adjustments

Warranty Voidance

Do not adjust system parts not specified in setup; doing so voids the warranty.

Troubleshooting and Returns

Refer system performance issues to your dealer; do not return goods without prior written agreement.

World Wide Warranty

Warranty Conditions

Offers a 2-year conditional warranty, valid for the first owner within six weeks of purchase, requiring proof of purchase.

Square One Specifications

Description

2-way, stand mounted loudspeaker, entry point to Wilson Benesch High-End.

Drive Units

Features 1x 170mm Tactic I Mid/Bass and 1x 25mm Soft dome tweeter.

Low Frequency Loading

Assisted Bass Radiator / Bass Ports.

Frequency Response

45Hz - 24KHz +/- 2dB on axis.

Sensitivity

87dB spl at 1 metre on axis. 2.83V input.

Impedance

6 Ohms nominal, 4 ohms minimum.

Crossover

First Order tweeter & bass roll-off, polypropylene capacitors, air cored inductors.

Internal Wiring

Hand-made loom of silver plated copper with PTFE jacket.

Input Connections

Bi-wireable, rhodium plated copper alloy terminals.

Maximum SPL

118dB at 1 metre.

Power Handling

200W peak unclipped programme.

Dimensions

Height 325mm, Width 200mm, Depth 285mm. Internal Volume 10 Litres.

Net Weight

10 kg / 22 kg with stand.

Finishes Available

Gloss Wood: Piano Black, White, Red Tulip etc. Satin Wood: Cherry, Maple, Oak.

Square Two Specifications

Description

2-way, floorstanding loudspeaker, entry point to Wilson Benesch High-End.

Drive Units

Features 1x 170mm Tactic I Mid/Bass and 1x 25mm Soft dome tweeter.

Low Frequency Loading

Assisted Bass Radiator / Bass Ports.

Frequency Response

40Hz - 24KHz +/- 2dB on axis.

Sensitivity

87dB spl at 1 metre on axis. 2.83V input.

Impedance

6 Ohms nominal, 4 ohms minimum.

Crossover

First Order tweeter & bass roll-off, polypropylene capacitors, air cored inductors.

Internal Wiring

Hand-made loom of silver plated copper with PTFE jacket.

Input Connections

Bi-wireable, rhodium plated copper alloy terminals.

Maximum SPL

118dB at 1 metre.

Power Handling

200W peak unclipped programme.

Dimensions

Height 975mm, Width 200mm, Depth 255mm. Internal Volume 32 Litres.

Net Weight

27 kg / 59.5 lbs.

Finishes Available

Gloss Wood: Piano Black, White, Red Tulip etc. Satin Wood: Cherry, Maple, Oak.

Square Three Specifications

Description

2-way, floorstanding loudspeaker, primary technologies from Odyssey Range.

Drive Units

Features 1x 170mm Tactic I Mid, 1x 170mm Tactic I Bass, and 1x 25mm Soft dome tweeter.

Low Frequency Loading

Assisted Bass Radiator / Bass Ports.

Frequency Response

35Hz - 24KHz +/- 2dB on axis.

Sensitivity

87dB spl at 1 metre on axis. 2.83V input.

Impedance

6 Ohms nominal, 4 ohms minimum.

Crossover

First Order tweeter & bass crossovers, polypropylene capacitors, air cored inductors.

Crossover Frequency

5 KHz, 500Hz.

Internal Wiring

Hand-made loom of silver plated copper with PTFE jacket.

Input Connections

Bi-wireable, rhodium plated copper alloy terminals.

Maximum SPL

118dB at 1 metre.

Power Handling

200W peak unclipped programme.

Dimensions

Height 975mm, Width 200mm, Depth 255mm. Internal Volume 31 Litres.

Net Weight

32 kg / 70.5 lbs.

Finishes Available

Gloss Wood: Piano Black, White, Red Tulip etc. Satin Wood: Cherry, Maple, Oak.

Square Five Specifications

Description

2-way Electric, 4-way Acoustic, floorstanding loudspeaker.

Drive Units

Features 1x 170mm Tactic I Mid, 1x 170mm Tactic I Bass, 2x 170mm Isobaric Tactic, 1x 25mm Soft dome tweeter.

Low Frequency Loading

Assisted Bass Radiator / Bass Ports.

Frequency Response

34Hz - 24KHz +/- 2dB on axis.

Sensitivity

87dB spl at 1 metre on axis. 2.83V input.

Impedance

6 Ohms nominal, 4 ohms minimum.

Crossover

First Order tweeter crossover, polypropylene capacitors, air cored inductors.

Crossover Frequency

5 KHz, 500Hz.

Internal Wiring

Hand-made loom of silver plated copper with PTFE jacket.

Input Connections

Bi-wireable, rhodium plated copper alloy terminals.

Maximum SPL

118dB at 1 metre.

Power Handling

200W peak unclipped programme.

Dimensions

Height 1115mm, Width 200mm, Depth 255mm. Internal Volume 31 Litres.

Net Weight

47 kg / 104 lbs.

Finishes Available

Gloss Wood: Piano Black, White, Red Tulip etc. Satin Wood: Cherry, Maple, Oak.

Centre Square Five Specifications

Description

2.5-way, stand mounted Centre channel loudspeaker.

Drive Units

Features 1x 170mm Tactic I Mid, 1x 170mm Tactic I Bass, 1x 25mm Soft dome tweeter.

Low Frequency Loading

Assisted Bass Radiator / Bass Ports.

Frequency Response

43Hz - 24KHz +/- 2dB on axis.

Sensitivity

87dB spl at 1 metre on axis. 2.83V input.

Impedance

6 Ohms nominal, 4 ohms minimum.

Crossover

First Order tweeter crossover, First Order Bass roll-off, polypropylene capacitors, air cored inductors.

Crossover Frequency

5 KHz, 500Hz.

Internal Wiring

Hand-made loom of silver plated copper with PTFE jacket.

Input Connections

Bi-wireable, rhodium plated copper alloy terminals.

Maximum SPL

118dB at 1 metre.

Power Handling

200W peak unclipped programme.

Dimensions

Height 210mm, Width 790mm, Depth 200mm. Internal Volume 16 Litres.

Net Weight

18 kg / 40 lbs or 30kg / 66 lbs with stand.

Finishes Available

Gloss Wood: Piano Black, White, Red Tulip etc. Satin Wood: Cherry, Maple, Oak.

Related product manuals