EasyManua.ls Logo

Wilson Electronics AG Pro 75 - Warnings and Recommendations

Wilson Electronics AG Pro 75
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: tech@wilsonelectronics.com. Hours: 7 am to 6 pm MST.
16
Warnings and Recommendations
Warning: The directional antenna must always be located so
the back or side points to the inside antenna. Never
point the front of the outside antenna toward the
inside antenna – this is to prevent oscillation.
Warning: Connecting the signal booster directly to the cell phone
with use of an adapter will damage the cell phone.
Warning: Use only the power supply provided. Use of a
non-Wilson Electronics product may damage your
equipment.
Warning: RF Safety: FCC regulations require that any fixed
outside antenna used with this signal booster may
not have gain (less cable loss) that exceeds 15
dBi and must be located at least 30 inches from all
people. Inside antennas must not exceed 7 dBi gain
(less cable loss) in the 800 MHz band or 10 dBi gain
(less cable loss) in the 1900 MHz band and must be
located at least 15 inches from all people.
Warning: Verify that both the outside antenna and the inside
antenna are connected to the signal booster before
powering up the signal booster.
Recommendation: Lightning surge protection is recommended
for all in-building installations.