Need help?Do you have a question about the WILSON PRO ENTERPRISE 4300 and is the answer not in the manual?
General| Brand | WILSON PRO |
|---|---|
| Model | ENTERPRISE 4300 |
| Category | Amplifier |
| Language | English |
Ensures continuous connectivity by preventing signal shutdown due to strong outside signals.
Offers choice of wall-mount or rack-mount installation with easy connections.
Automatically controls the amplifier for connectivity in large and multi-story buildings.
Provides an easy-to-use interface for assessing performance and configuration.
Features four ports for independent control, supporting up to 100,000 sq. ft. coverage.
Explains Split Mode for installations with cell towers in different directions.
Explains Common Mode for installations with cell towers in the same direction.
Displays amplification and status of each port and band after boot-up.
Explains green and yellow indicators for band status, including operational states and troubleshooting tips.
Details general settings accessible via tabs, like model, serial number, and firmware versions.
Configures network settings like IP address, netmask, gateway, and DNS servers.
Displays modem status, RSSI, IMEI, ICCID, firmware version, and band.
Manages cloud communication preferences, including reset options for local configuration.
Configures antenna settings, such as Common Mode or Split Mode, for outdoor antennas.
Details how to configure Split Mode for separate outside antennas for specific frequency bands.
Illustrates how oscillation conditions are displayed and potential troubleshooting steps.
Shows how a shutdown condition is displayed and provides troubleshooting guidance.
Explains the status icons for Ethernet connection and network status.
Explains the status icons for Cloud connection and LTE modem status.
Provides instructions on how to log into the WilsonPro Cloud portal via an Ethernet connection.
Summarizes amplifier status and alerts for customers within the WilsonPro Cloud.
Guides users through the process of creating a new customer account in the WilsonPro Cloud.
Outlines the steps to add a new location for an existing customer in the WilsonPro Cloud.
Details the process of adding a new amplifier to a customer location within the WilsonPro Cloud.
Allows viewing of amplifier details, including status, alerts, and total alerts.
Provides details on individual ports, their status, and activation options.
Displays per-band performance metrics, including signal strength and gain for specific ports.
Shows historical data for performance and signal levels over time for specific bands.
Manages band settings and inside antenna configurations via the utility.
Configures communication preferences and Ethernet settings through the utility.
Manages local device login, password, and system maintenance like rebooting.
Provides crucial warnings regarding network protection, power supply, operating environment, and RF safety.
Offers a 30-day money-back guarantee for product performance issues.
Provides a three-year warranty against defects in workmanship and materials.
To Next Page