EasyManua.ls Logo

WilTec 65057 - Page 4

WilTec 65057
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© by WilTec Wildanger Technik GmbH Item 65057 Page 4
http://www.wiltec.de 09 2024-1
The grill and its parts may have sharp edges. Handle the parts of the grill carefully to avoid
accidents or injuries during assembly and operation. Wear protective gloves if necessary.
Operate the grill with great care. Distraction can cause you to lose control of the device.
Always be attentive and mindful of what you are doing. Do not use the product if you are inat-
tentive or tired, or under the influence of drugs, alcohol, or medication. Even a moment of inat-
tention while using the product can lead to serious injury.
Do not use strong or abrasive solvents or scouring pads to clean the grill, as they can damage
the surfaces and leave scratch marks.
Actions to take if you smell gas
Turn off the gas supply at the bottle.
Extinguish all open flames.
Open the grill hood.
If the gas smell persists, do not use the grill and have it inspected by a professional workshop.
Safety instructions for handling gas cylinders
Warning!
Pressurised gas cylinders must always be secured against falling, being knocked
over, and extreme heat!
Gas cylinders that are not connected for use should not be stored near the gas grill or other
devices.
Gas cylinders should always be transported and stored upright. Secure the cylinders during
transport to prevent them from tipping over. Store gas cylinders in a well-ventilated area away
from direct sunlight and frost.
The gas cylinder must always be used in an upright position.
Never move or shift the gas cylinder while it is in use.
Keep the protective caps on gas cylinders tightly closed when not in use. This prevents gas
from escaping and protects the valve from damage.
Never use gas cylinders without a pressure regulator.
Smoking should be strictly prohibited near gas cylinders. Sparks or open flames can ignite
gases and lead to an explosion.
Gases can be dangerous. Ensure adequate ventilation and follow all safety regulations for han-
dling the specific gas being used.
Regularly check connections for leaks by applying a soap solution and looking for bubbles.
Never use an open flame to detect leaks!
If a leak is detected, immediately contact the fire department and inform them of the presence
of a leaking gas cylinder.
Never attempt to repair gas cylinder valves or other parts yourself. Repairs should only be per-
formed by qualified personnel.
Always follow the manufacturer's specific instructions for the use, storage, and handling of gas
cylinders.
Before use
Connecting the gas cylinder
This device is only suitable for low-pressure butane/propane gas and must be equipped with an
appropriate low-pressure regulator and a flexible hose.
This device is intended to operate with a 50-mbar regulator with butane/propane gas.
Use a suitable regulator certified according to BS EN 12864:2001.
Check with your LPG gas supplier for suitable regulators for gas cylinders.
To operate this grill, you need a standard 5-kg or 11-kg propane or butane gas cylinder.
Note! The gas cylinder and gas hose have a left-hand thread.