WilTec CTF-2800 User Manual

© by WilTec Wildanger Technik GmbH Seite 10
http://www.wiltec.info
Operating Instruction
Pond Pumps and Fountain Pumps
CTF
-
2800
-
50286
CTF- 3800 - 50287
CTF- 4800 - 50288
CTF- 5800 - 50289
CTF- 5000 - 50290
CTF- 6000 - 50291
CTF
-
7000
-
50292
CTF- 8000 - 50293
CTF-10000 - 50294
CTF-12000 - 50295
CTF-14000 - 50296
CTF-16000 - 50297
Similar illustrations – may vary depending on the version
Vor Inbetriebnahme Bedienungsanleitung und Sicherheitshinweise lesen und beachten
Read and follow the operating instructions and safety information before using for the first time.
Avant la mise en service, lisez le mode d’emploi et les consignes de sécurité et respectez-les.
Subject to technical changes!
Due to further developments, illustrations, functioning steps and technical data may differ slightly.
Documentation Updates
If you have any suggestions for the improvement or in case you have noticed irregularities, please
contact us.

WilTec CTF-2800 Specifications

General

Brand	WilTec
Model	CTF-2800
Category	Water Pump
Language	English

Summary

Introduction

Security Notes

Operation and Setup

Operating Parameters

Specifies the maximum liquid temperature and liquids to avoid for pump longevity.

Electrical and Mains Connection

Details connecting the pump to a grounded power supply, ensuring correct voltage and amperage.

Installation and Commissioning

Guides on pump placement, cord protection, tubing connection, and pre-operation checks.

Maintenance and Storage

Overload Protection

Explains the pump's overload protection and troubleshooting steps if it trips.

Routine Maintenance

Recommends weekly cleaning and care for long durability and continuous operation.

Winter Storage

Provides instructions on how to properly store the pump during winter to prevent damage.

Disposal Regulations