WilTec LIFAN 2V90F User Manual

© by WilTec Wildanger Technik GmbH Item 92670 Page 18
http://www.wiltec.de 11 2023-1
Technical specifications
Model name
2 V90F
Bore x stroke (㎜)
90 × 78.5
Cubic capacity (㎤)
999
Fuel
Unleaded petrol
Max. Net torque (Nm / rpm)
69.50 / 2800
Max. motor power (kW / rpm)
24 / 3600
Motor speed (rpm)
3600
Motor power (hp / kW)
33.31 / 24.50
Motor type
4-cycle 2-cylinder V-motor with air cooling
Engine oil capacity (ℓ)
2.4
Net power (kW / rpm)
24.5 / 3600
Product type
Motor
Starter
E-start
Compression ratio
8.9:1
Ignition system
Transistor/magneto ignition (TCI)
Fuel
Petrol ≥ 92 octane
Lubricant
SJ 10 W-30
Amount of lubricant (ℓ)
2.3
Spark plug
F6RTI-5
Spark-plug gap (㎜)
0.7–0.8
Cooling system
Ventilation
Direction of rotation of the PTO axis
Anti-clockwise (viewed from the dispensing side)
Note! The technical data may vary for different types and may change at any time without prior notice.
Circuit diagram
Motor with electric starter and oil protection system
Important note: Reproduction and any commercial use (of parts) of this operating manual, requires a
written permission of WilTec Wildanger Technik GmbH.

WilTec LIFAN 2V90F Specifications

General

Brand	WilTec
Model	LIFAN 2V90F
Category	Engine
Language	English