Inspection before commissioning
For your safety and to increase the service life of your device, please take some time to check the
condition of the petrol engine before operation.
Warning!
• Improper maintenance or operation of the petrol engine without fault checking can lead to seri-
ous injury or even death.
• An inspection must be carried out before each operation so that various faults can be rectified.
• Ensure that the motor is on a level surface before inspection.
• Check the following points before each start:
General conditions
• Check for oil and fuel leaks.
• Remove excess dirt and deposits, especially around the silencer.
• Check if there are any signs of damage.
• Check the position of all bonnets and covers and check the fastening of the bolts, nuts, and
screws.
Petrol engine
• Ensure that there is a sufficient fuel level. Prior refuelling can reduce or prevent interruptions
during operation due to the need for refuelling.
• Check the oil level. A low oil level leads to damage to the petrol engine during operation.
• Check the air-filter element. A dirty air filter hinders the air supply to the carburettor and reduces
the power of the motor.
• Before starting the petrol engine, check the equipment and read the operating instructions to
understand the operating instructions and necessary steps.
To Next Page
Loading...
Need help?
General
