WilTec LIFAN 2V90F User Manual

© by WilTec Wildanger Technik GmbH Item 92670 Page 8
http://www.wiltec.de 11 2023-1
Maintenance schedule
Frequency
Type of intervention
Every
time
During
the 1st
month or
after 40
hours
After 6
months of
100 hours
Every year or
after 300
hours
Every 2 years
or after 500
hours
Motor oil
Check oil level.
X
Replace.
X
X
Air filter
Check.
X
Clean.
X
(1)
Replace.
X*
Spark plug
Clean, adjust.
X
Replace.
X
Ignition sen-
sor
Clean.
X
Idling
Check, adjust.
X
Burning
chamber
Clean.
Every 1000 hours of operation
Oil filter
Replace.
Every 200 hours of operation
Petrol filter
Clean.
X
Fuel supply
line
Check.
After 2 years (replace if necessary)
(1) In dusty environments, service more frequently than indicated in the table. — * Only replace paper
element
• It is recommended that an authorised specialist carries out the work unless you are specially
trained and equipped with the appropriate tools.
• For commercial use, it is important to record the operating hours in order to determine the ap-
propriate maintenance cycle.
• Damage resulting from non-compliance with this maintenance schedule is excluded from the
warranty.
Refuelling
Recommended fuel
• It is recommended to use a petrol with 92 octane for this engine.
• Stop the engine and refuel in a well-ventilated area. If the petrol engine has just been running,
allow it to cool down first. It is forbidden to refuel in places where there may be flames or sparks.

WilTec LIFAN 2V90F Specifications

General

Brand	WilTec
Model	LIFAN 2V90F
Category	Engine
Language	English