WilTec WT-7000 User Manual

© by WilTec Wildanger Technik GmbH Item 64215, 64216 Page 6
http://www.WilTec.de
http://www.aoyue.eu 10 2023-1
http://www.teichtip.de
The position of the controllers and the water inlet may vary for the individual products.
Using the double water inlet
The machine has two water inlets. Each drum has a separate water inlet.
Attention!
• The maximum water inlet pressure is 3 bar.
• The minimum water inlet pressure is 0.2 bar.
If spin-drying does not come to a standstill in the space of 12 s after opening the lid, stop operation and
contact an expert.
Installation
• Place the washing machine to a level and stable surface.
• Keep the washing machine at a distance of more than 5 cm from the wall to avoid noises during
washing.
Connecting the drain hose (if there is no drain pump)
№
Name/description
1
Drain hose extension
2
Below 2 m
3
Below 15 cm
4
The end of the drain hose must never be put into water.

WilTec WT-7000 Specifications

General

Brand	WilTec
Model	WT-7000
Category	Washer
Language	English