Wilton MECHANICS PRO Series

To Next Page

MECHANICS PRO Series Vise

Replacement parts

Stock no.

28810 28811 28812 28813 28814

Model no.

845M 855M 865M 880M 8100M

ITEM DESCRIPTION QTY.

PART NO.

1~5 Spindle and Handle Assembly, Complete 1 28810-001 28811-001 28812-001 28813-001 28814-001

1 Spindle and Handle 1

2 Roll Pin 1

3 Needle Roller Thrust Bearing 1 BB-AXK1730

BB-AXK2035

BB-AXK2542

4 Spindle Washer 1 89125-07 DT125B-09 DT125B-09 GB95-85 GB95-85

5 Rubber Ring 2 744M-JQ 745M-JQ 746M-JQ 748M-JQ 750M-JQ

6 Guide Key 1 744M-08 1745-08 1765-10 1780-09 750M-06

7 Elastic Cylinder Pin 4x14 mm 2

8 Moving Body 1

9,10 Jaw Inserts (set of 2) with Screws 1 28810-008 28811-008 28812-008 28813-008 28814-008

11 Pipe Jaws (set of 2) with Screws 1 28810-010 28811-010 28812-010 28813-010 28814-010

12 Stationary Body 1

13 Spindle Nut 1 744M-04 745M-04 745M-04 748M-04 750M-05

14 C-Retaining Ring, Internal 1 F007076 F006092 F006092 F006093 F006093

15 End Cap 1 744M-05 745M-05 745M-05 748M-05 748M-05

16 Plate Rivet 4

17 Wilton Logo Plate 2 745M-10 745M-10 745M-10 745M-10 745M-10

18~21

Base Plate Assembly, Complete 1 28810-017 28811-017 28812-017 28813-017 28814-017

18 Base Plate 1 744M-06 745M-06 745M-06 748M-06 748M-06

19,21 Locking Nut Assembly (one set) 2 28810-018 28811-018 28812-018 28813-018 28814-018

20 Locking Pad 1 744M-07 745M-07 745M-07 748M-07 748M-07

To order parts or reach our service department, call 1-800-274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m. CST. Having the Model

Number and Serial Number of your tool available when you call will allow us to serve you quickly and accurately. Some parts are shown for

reference only, and may not be available individually.

WILTON

427 New Sanford Road

LaVergne, Tennessee 37086 Part No. M-28810

Ph.: 800-274-6848 Edition 1 07/2018

Need help?

Do you have a question about the Wilton MECHANICS PRO Series and is the answer not in the manual?

Summary

Important Safety Instructions

Specifications for Mechanics Pro Series Vises

This document describes the Wilton Mechanics Pro Series Vise, a robust tool designed for securely holding workpieces during various mechanical tasks. The manual provides detailed information on its components, specifications, safety guidelines, and maintenance.

Function Description

The Wilton Mechanics Pro Series Vise is primarily used to clamp and hold objects firmly, allowing for operations such as cutting, filing, drilling, and assembly. Its design incorporates a stationary body, a moving body, and a spindle and handle assembly that facilitates the clamping action. The vise features both flat jaw inserts for general work and pipe jaws for holding cylindrical objects, enhancing its versatility. The swivel base allows the vise to be rotated and locked in various positions, providing flexibility in workpiece orientation.

Important Technical Specifications

The Mechanics Pro Series Vise is available in several models, each with distinct specifications:

Model 845M (Stock No. 28810):
- Jaw width: 4.5 inches (114mm)
- Maximum opening: 4 inches (102mm)
- Throat depth: 3-1/2 inches (89mm)
- Pipe jaw capacity: 1/4 to 3 inches (6.4 to 76.2mm)
- Net weight: 31.0 lbs. (14.1kg)
Model 855M (Stock No. 28811):
- Jaw width: 5.5 inches (140mm)
- Maximum opening: 5 inches (127mm)
- Throat depth: 3-5/8 inches (92mm)
- Pipe jaw capacity: 1/4 to 3 inches (6.4 to 76.2mm)
- Net weight: 37.9 lbs. (17.2kg)
Model 865M (Stock No. 28812):
- Jaw width: 6.5 inches (165mm)
- Maximum opening: 6 inches (152mm)
- Throat depth: 4-3/8 inches (111mm)
- Pipe jaw capacity: 1/4 to 4 inches (6.4 to 101.6mm)
- Net weight: 55.6 lbs. (25.2kg)
Model 880M (Stock No. 28813):
- Jaw width: 8 inches (203mm)
- Maximum opening: 8-1/2 inches (216mm)
- Throat depth: 4-1/2 inches (114mm)
- Pipe jaw capacity: 1/2 to 4 inches (12.7 to 101.6mm)
- Net weight: 83.1 lbs. (37.7kg)
Model 8100M (Stock No. 28814):
- Jaw width: 10 inches (254mm)
- Maximum opening: 12 inches (305mm)
- Throat depth: 5-1/4 inches (133mm)
- Pipe jaw capacity: 1/2 to 5 inches (12.7 to 127mm)
- Net weight: 115.3 lbs. (52.3kg)

All models feature a spindle and handle assembly, needle roller thrust bearing, spindle washer, rubber ring, guide key, elastic cylinder pin, moving body, stationary body, spindle nut, C-retaining ring, end cap, plate rivets, Wilton logo plate, base plate assembly, locking nut assembly, and locking pad. The jaw inserts and pipe jaws are replaceable components, ensuring longevity and adaptability.

Usage Features

The vise is designed for secure and efficient operation, but adherence to safety guidelines is crucial.

Mounting: The vise must be mounted to a properly secured bench top using appropriate size bolts, nuts, lock, and flat washers. Welding the base to any metal object is strictly prohibited. The swivel base lock-down nuts should only be hand-tightened; using pipe extensions to tighten them can bend handles and overstress the bolts.
Clamping: Always use a vise of suitable size and capacity for the workpiece. The spindle handle (tommy bar) is engineered to bend if excessive clamping pressure is applied, preventing damage to the vise itself. Never use a hammer, pipe extension, or cheater bar on the spindle handle. The movable jaw should not be unscrewed beyond its maximum specified opening.
Safety: The vise should never be used as a press for assembly or disassembly. Eye and face protection must be worn when striking vise-held objects or using power tools with the vise. Misuse can lead to serious injury to eyes, hands, or limbs.

Maintenance Features

The manual provides a detailed parts list for each model, facilitating easy identification and ordering of replacement components.

Replacement Parts: Key components such as the spindle and handle assembly, jaw inserts, pipe jaws, spindle nut, and various bearings and rings are listed with their respective part numbers. This allows users to replace worn or damaged parts, extending the life of the vise.
Ordering Parts: Parts can be ordered by calling 1-800-274-6848 during business hours (Monday through Friday, 8:00 a.m. to 5:00 p.m. CST). Having the model and serial number of the tool available will ensure quick and accurate service. Some parts are shown for reference only and may not be individually available.
Warranty: Wilton offers a lifetime warranty that covers manufacturer's defects. This warranty does not cover failures due to misuse, abuse, negligence, accidents, normal wear-and-tear, improper repair, alterations, or lack of maintenance. For more information, users can visit wiltontools.com.
Technical Support: Technical support is available by calling 1-800-274-6846. Proof of initial purchase is required. Wilton has Authorized Service Centers across the United States for further inspection if needed.

The Wilton Mechanics Pro Series Vise is a durable and versatile tool, designed for professional use, with comprehensive support for maintenance and parts replacement to ensure its long-term functionality.