Customer support:support@wimaxit.com Website:www.wimaxit.com
#7 Show Settings Menu
Press wheel button.
While on menu status, short press to confirm and save your setting.
Volume Setting Shortcut:
Toggle wheel button up and hole for 3 seconds.
Brightness Setting Shortcut:
Toggle wheel button down and hold for 3 seconds.
#8 Power Button
Power On:
Short press power button for 3 seconds.
Power Off:
Hold power button for 3 seconds.
Return/ Exist:
While on menu status, short press for return.
Input:
Press power button.
NOTE: Make sure to save your settings via the Wheel Button before closing the menu.
Power Indicator Light
Red Color: Standby status/No valid source;
Blue Color: ON/Input source detected
Dark: OFF
To Next Page
Loading...
