Need help?Do you have a question about the Wimius P61 and is the answer not in the manual?
General| Contrast Ratio | 10000:1 |
|---|---|
| Lamp Life | 100, 000 Hours |
| Projection Size | 50-300 inches |
| Zoom Function | Yes |
| Operating System | Android 9.0 |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| Native Resolution | 1920 x 1080 |
| Maximum Supported Resolution | 4K |
| Input Ports | HDMI, USB, VGA, AV |
| Speaker | 10W |
| Keystone Correction | ±50° (Vertical), ±50° (Horizontal) |
Clean the projector using a wet cloth without detergent after unplugging the power cable.
Always use recommended accessories to prevent projector damage.
Do not place the projector in a wet environment like a damp basement or near swimming pools.
Ensure vents are clear of obstructions to prevent projector overheating.
Verify that the power supply is within the projector's required range.
Unplug the power cable from the projector during thunderstorms.
Do not attempt self-repair; contact a professional technician due to high internal voltage.
Keep the projector away from heat devices that could cause damage.
Steps for connecting iOS devices wirelessly via Wi-Fi and Airplay for screen mirroring.
Steps for connecting Android devices wirelessly using Multi-Screen/Wireless display.
Connect the projector to a PC using an HDMI cable and select the HDMI signal source.
Connect the projector to a soundbar using a 3.5mm aux cable and turn on both devices.
Connect the projector to a DVD player using the provided AV cable and turn on both devices.
Adjust contrast, brightness, color, and sharpness of the image in User mode.
Adjust the color temperature of the displayed image to cool, medium, or warm.
Flip the image orientation for different mounting positions like front or rear table/ceiling.
Select from standard, movie, music, sports, or user-defined sound modes.
Adjust the balance of the built-in speaker from -50 to +50.
Set the automatic sleep timer for the projector to turn off after a specified duration.
Configure the auto sleep time for the projector, e.g., 3H, 4H, or 5H.
Set the duration for the on-screen display (OSD) menus, from 5s to 30s.
Choose the display language for the projector's on-screen menus.
Adjust the aspect ratio for image display, such as 4:3 or 16:9.
Configure the screen to display blue when there is no input signal.
Choose the Bluetooth mode for connecting external speakers or devices.
Restore all projector settings to their original factory default values.
Update the projector's software using a software file on a USB drive.
Upgrade the projector's software online using the OTA upgrade feature.
View network information and turn the network connection on or off.
To Next Page
