Need help?Do you have a question about the WINBO WB20141117 and is the answer not in the manual?
General| Brand | WINBO |
|---|---|
| Model | WB20141117 |
| Category | 3D Printers |
| Language | English |
Details the process of installing the machine's operational software from the SD card.
Guides users through configuring the software for the first time run wizard and selecting machine.
Explains how to load software settings by importing a configuration file from the SD card.
Describes the quick print mode with options for print quality and material selection.
Details how to switch to full settings for advanced print parameter adjustments.
Provides instructions on unpacking and installing the necessary accessories for the 3D printer.
Explains the basic operations and navigation using the LCD panel control knob.
Guides users on testing the machine's movement and heating functions before printing.
Details the crucial process of leveling the build plate for proper print adhesion.
Describes the procedure for smoothly feeding the filament spool into the printer.
Explains how to change filament while a print job is in progress.
Provides instructions on how to unload filament from the extruder.
Covers basic model adjustments like rotating, scaling, and flipping before printing.
Details how to rotate the 3D model on X, Y, or Z axes.
Explains how to adjust the size of the 3D model by dragging or inputting values.
Describes how to mirror the 3D model along the X, Y, or Z axes.
Outlines additional model editing functions available via right-click menu.
Explains how to change the view mode for better model inspection and editing.
Guides users on saving models to an SD card and initiating prints from it.
Details the process of printing directly from a computer via USB connection.
To Next Page