Winco POP-8B User Manual (English)

Questions and Answers:

J
Jacob HensleyAug 12, 2025
What to do if my Winco Kitchen Appliance is not turning on?
- Q
  qfloresAug 12, 2025
  If your Winco Kitchen Appliance isn't turning on, there are several possible reasons. First, ensure the power supply cord is correctly plugged into a working outlet. Second, verify that the power switch is in the 'on' position and the unit is plugged in. Third, a fuse might have blown; in this case, you should replace the fuse located under the holding tray. Finally, there may be damage to the plug/cord or external wiring, which requires replacement by an authorized service provider.
T
Tabitha LopezAug 19, 2025
Why is the kettle mixer not turning in my Winco Kitchen Appliance?
- C
  Caleb LeeAug 19, 2025
  If the kettle mixer in your Winco Kitchen Appliance isn't turning, it could be due to a few reasons. First, check that the motor/power switch is in the 'ON' position and the light on the switch is illuminated. Second, verify that nothing is obstructing the kettle mixer from rotating, as the mixing shaft might be locked or bent. Finally, there could be an internal wiring fault; in this case, check connections between the motor and turn switch - Replacement must be done by an authorized service provider.
R
randersonAug 27, 2025
What to do if the switch light is on, mixer is running, but kettle is not heating up in my Winco Kitchen Appliance?
- T
  Tyler WardAug 27, 2025
  If the switch light is on, the mixer is running, but the kettle is not heating up, ensure that the flexible conduit from the kettle is plugged into the receptacle on the ceiling of the internal cabinet. Also, there may be an internal wiring fault and you should check connections going from the power switch to the kettle outlet - Replacement must be done by an authorized service provider.
V
Vanessa StanleySep 4, 2025
How to fix the internal light if it is not on in my Winco Kitchen Appliance?
- A
  Ashley AvilaSep 4, 2025
  If the internal light in your Winco Kitchen Appliance is not on, first ensure that the light switch is turned on. If it's still not working, the light bulb may have burnt out and needs to be replaced with the same style light bulb.

Winco POP-8B Specifications

General

Brand	Winco
Model	POP-8B
Category	Kitchen Appliances
Language	English

Related product manuals

Winco EPO-1

8 pages

Winco POP-8B User Manual

Table of Contents

Questions and Answers:

Winco POP-8B Specifications

Related product manuals