Wincor Nixdorf BA91W User Manual

BA91W User Manual
9
Preparing the stand
From the stand:
1. Remove the VESA
cover.
Preparing the display
1. Place a piece of protection
sheet on a flat surface e.g.
a table.
2. Lay the display face down
on the protection sheet.
3. Tighten the two screws
half way through.
4. Remove the cable cover at
the bottom of the display.
1
2
3
4

Wincor Nixdorf BA91W Specifications

General

Brand	Wincor Nixdorf
Model	BA91W
Category	Monitor
Language	English