Why is my Windchaser PACR12 not working?
If your Windchaser Air Conditioner/Dehumidifier isn't working, first ensure it's properly plugged into the wall socket. Then, check the circuit board for a 15-20amp fuse. Also, if the water tank is full and the alarm light is on, inspect Drain (A) for any blockages and empty Drain (B).
Why does my Windchaser PACR12 keep cutting off?
If your Windchaser Air Conditioner keeps cutting off, several factors could be the reason: * The exhaust hose might be too long, incorrectly installed, or kinked. Remember, you can only extend the exhaust hose using a maximum of 5 feet of 4-inch PVC pipe, making the total exhaust length 10 feet. * The unit might be too close to a wall or object. Ensure it is at least 1 1/2 feet away from walls and other items. * The flap vent might be obstructing the wall exhaust. Try using a screen instead of the flap vent for wall exhaust. * The ceiling or basement might not have enough ventilation. The unit will overheat if the exhaust can't fully vent. * The “timer off” function may have been activated. Push the power button to turn the unit on.
What to do if the Alarm Indicator Light is illuminated on my Windchaser Air Conditioner?
If the Alarm Indicator Light is illuminated on your Windchaser Air Conditioner, it means the condensate tank is full and the unit can't drain. Ensure the drain hose is no more than 5.9 feet above the ground. If Drain (A) still doesn't work, drain the condensate through Drain (B). After draining the tank, restart the unit.
Why is the LED indicator light blinking on my Windchaser Air Conditioner/Dehumidifier?
If the LED indicator light is blinking on your Windchaser Air Conditioner/Dehumidifier, it could mean: In A/C mode, the room temperature has reached the set temperature, and the compressor has turned off. This is normal; lower the set temperature to restart the compressor. In dehumidifier mode, the room humidity is 50% or lower, so the compressor isn't running, which is also normal.
What to do if the LED display shows the unit is set, but the Windchaser PACR12 is not running?
If the LED display shows the unit is set but your Windchaser Air Conditioner isn't running, the “timer on” feature may be activated. Push the Power button to turn the unit on and deactivate the “timer on” feature.
Step-by-step guide for safely removing the air conditioner from its packaging and preparing it for use.
Explains how the air conditioner works and factors affecting room comfort, including humidity, temperature, air purity, and airflow.
Provides advice on optimizing energy efficiency and reducing power consumption while operating the unit.
Lists detailed specifications for the air conditioner, including cooling capacity, power input, dimensions, and weight.
Details the functions of each button and indicator on the air conditioner's control panel for user operation.
Explains the two methods for continuous drainage of condensate water from the unit, via pump or gravity.
Step-by-step instructions for installing the exhaust kit into a window for proper ventilation.
Detailed instructions for installing the exhaust kit through a wall, including drilling and adapter placement.
Comprehensive guide to operating the air conditioner using the control panel buttons and timer functions.
Explains how to use the remote control to operate the air conditioner's various functions and settings.
Instructions for cleaning the exterior of the unit and the air filters to maintain performance and hygiene.
Guidelines for properly preparing and storing the air conditioner for extended periods, such as during the off-season.
Outlines the terms, conditions, coverage, exclusions, and procedures for the product's limited warranty.
General| Type | Portable Air Conditioner |
|---|---|
| Cooling Capacity | 12000 BTU |
| Voltage | 115V |
| Noise Level | 52 dB |
| Dimensions | 18 x 15 x 30 inches |
| Power Supply | Corded Electric |
To Next Page
