3. Operation
07
1. Secure the scooter standpipe and
open the kickstand
Before first use:
1. Read all the points in the paragraph ’Safety instructions’.
2. Connect the power adapter to the charging port and wall outlet,the indicator on the
adapter will illuminate in red.
Note: Connect the power adapter to charging port firstly.
2. Install the crossbar on the standpipe
3. Use the hex wrench in the packing
box to lock the screws on both sides
Open the rubber
stopper
Insertthe
charging plug
After charging, close the
rubber stopper
4. After installation, long press the
button to turn on the machine
To Next Page
Loading...