24 25
Stuff it between the gap of the upper and lower sashes of
your window.
Step 5. Lock and insulate your window.
Attach the sash lock as shown in the diagram above. Attach the sash lock as shown in the diagram above.
Option 1: Wood windows. Option 2: Vinyl windows.
1
That’s it for installation! Just a few more things to check over, and then you can relax.
This will plug any air gaps and help keep out bugs and draft.
2 3
Use the nonadhesive foam to ll the
gaps in your window.
Make sure you are cutting the foam with the non-adhesive
sides. Measure and cut the foam to be the width of your
window from the left to right side.
Cut the non-adhesive insulation foam
to t the width of your window.
x
CAUTION: For vinyl or similar windows, attach the
bracket to the side jamb of the window (not the
window itself). See diagram above. This will help
avoid broken glass and window damage.
To Next Page
Loading...
