Windsor L-GG054PST-PK User Manual

SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble
or install the product.
WARNING
Keep all children and pets away from assembly area. Children and pets should be
supervised when they are in the area.
Keep all flame and heat sources away from the tent fabric. This tent is made with
fabric that meets CPAI-84 specification for flame resistance. It is not fireproof. The
fabric will burn if left in continuous contact with any flame sources. The application of
any foreign substance to the tent fabric may render the flame-resistant properties
ineffective.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Windsor Grill Gazebo-Canopy
Assembly Instruction
Item no# L-GG054PST-PK

Windsor L-GG054PST-PK Specifications

General

Category	Outdoor Furnishing
Model	L-GG054PST-PK
Color	Pink
Weather Resistance	Yes
Assembly Required	Yes
Material	Steel

Summary

Assembly Instruction

Safety Information

Read and understand the entire manual before attempting to assemble or install the product.

Warning

Keep children and pets away. Keep flame and heat sources away from tent fabric.

Preparation

Ensure all parts are present before assembly. Do not assemble if parts are missing or damaged.

Parts List

Remove the Canopy

Instructions for disassembling the gazebo canopy.

Step 1: Remove Big Canopy

Remove the canopy (Q) from four corners and set aside.

Step 2: Remove Small Top

Take down the small top from the big top.

Step 3: Remove Finial

Take down the finial (N) from the small top.

Step 4: Remove Small Canopy

Remove the small canopy (P) from the small top cant beam (F).

Step 5: Take Down Big Canopy

Turn up the big canopy (Q) and take it down.

Replace the Canopy

Step 1: Position Big Canopy

Put the big canopy (Q) onto the big top without spreading it out.

Step 2: Position Small Canopy

Place the small top (P) and fix its canopy corners to the cant beam (F).

Step 3: Attach Finial

Fix the finial (N) to the small top.

Step 4: Assemble Tops

Fix the small top assembly to the big top using the cant beam tube (F).

Step 5: Secure Big Canopy

Spread out the big canopy (Q) and fix its corners to the big top cant beam (G).

Care and Maintenance

Limited Warranty

Warranty covers defects in material/workmanship for one year for personal use.

Exclusions

Excludes commercial use, damage from nature, misuse, improper assembly, and corrosion.