EasyManua.ls Logo

Wine Corner WINEMASTER WINE ARM 15 User Manual

Default Icon
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
USER GUIDE
DEFYING
CONVENTION
WINE ARM 15
Question and Answer IconNeed help?

Do you have a question about the Wine Corner WINEMASTER WINE ARM 15 and is the answer not in the manual?

Wine Corner WINEMASTER WINE ARM 15 Specifications

General IconGeneral
BrandWine Corner
ModelWINEMASTER WINE ARM 15
CategoryAir Conditioner
LanguageEnglish

Summary

INTRODUCTION

CHARACTERISTICS

CABINET LAYOUT

1.1. EVACUATION

Ensures proper hot air evacuation for cooling efficiency.

1.2. CABINET INSULATION

Crucial for efficient operation, temperature, and humidity stability.

1.2.1. WALLS, CEILING AND FLOOR INSULATION

Guidance on selecting and installing insulation for walls, ceiling, and floor.

1.2.2. DOORS

Requirements for door insulation to maintain continuity with the cabinet.

INSTALLATION OF THE WINEMASTER® CONDITIONING UNIT

2.1. CUTTING THE CEILING

Instruction on cutting a space in the ceiling to house the conditioning unit.

2.2. INSTALLATION OF THE CONDITIONING UNIT

Details on how to install the conditioning unit inside or from above the cabinet.

2.2.3. INSTALLATION OF THE WATER DRAIN-OFF

Guide for installing the condensate evacuation system to prevent water overflow.

2.2.4. DUCT VENTILATION

Information on setting up duct ventilation for air flow and sound insulation.

2.2.5. INSTALLATION OF THE THERMOSTAT

Instructions for positioning the thermostat sensor for optimal temperature monitoring.

2.2.6. INSTALLATION OF THE HOOD

Steps for inserting and securing the magnetic cover hood.

SWITCHING ON THE WINEMASTER® CONDITIONING UNIT

3.1. CONNECTING THE CONDITIONING UNIT

How to connect the unit and initial display behaviour.

3.2. SWITCHING ON

Procedures for operating the conditioning unit and its modes.

3.2.1. Setting the temperature

Guide to adjusting the setpoint temperature using the thermostat controls.

3.2.2. Standby Mode

Instructions for placing the unit in standby mode and exiting it.

3.2.3. Automatic Defrost

Explanation of the automatic defrost function and its operation.

3.2.4. Manual Defrost

How to manually activate the defrost cycle for the unit.

SERVICING & MAINTAINING

4.1. MAINTAINING THE DUST FILTER

Steps for checking and replacing the dust filter to prevent unit clogging.

4.2. CONDENSATE EVACUATION PIPE

Procedure for checking and cleaning the condensate pipe for obstructions.

WARRANTY

5.1. STATUTORY WARRANTY

Details on statutory warranties for hidden faults and compliance.

5.2. 2-YEAR CONTRACTUAL WARRANTY

Information on the 2-year warranty against manufacturing defects.

5.3. WARRANTY APPLICATION CONDITIONS

Conditions required for the contractual warranty to be applicable.

5.4. WARRANTY EXCLUSIONS AND LIMITATIONS

Cases where the warranty is excluded or limited.