Page
40
• The installation and assembly of this device in non-stationary setup locations (e.g.
on ships) must be carried out by specialist companies / electricians, provided they
guarantee the prerequisites for the safe use of this device.
• For energy saving reasons please ensure that the door is closed when the appliance
is turned on.
19.5.2 Legs/feet
There are FOOT (3 bigger feet and 1 small foot).
To level your appliance, adjust the front legs at the bottom of the applian
19.5.3 The handle installing
The wine cooler comes with 1 metal stainless steel handle. To install simply screw them to
the door with the supplied screws.
handle
screw
19.5.4 Wine shelves
Remove all bottles from the shelves. Lift the shelf upwards and the gently pull it out. Any of
the wine shelves can be removed to accommodate larger bottles.
19.5.5 To remove a shelf
Remove all bottles from the shelves. Lift the shelf upwards and the gently pull it out.
PLEASE NOTE
► Ensure that the tabs are firmly engaged in place before storing any bottles.
To Next Page
Loading...