Rearranging the Shelf Layout
You can rearrange the configuration of your wine and beverage cooler by
moving the location of your shelf brackets. To move a sliding shelf, first
remove all bottles then remove the rolling shelf as illustrated above. You are
now ready to remove the shelf guide rails.
To remove shelf slide rails:
1. Fully extend out the guide rail.
2. Lift the front of the guide rail upwards to separate from the
appliance wall.
3. Pull guide rail towards you to completely release from the appliance.
4. Do not mix up the left and right guide rails.
5. Reposition guide rail to the new location and reinstall in reverse
order.
To Next Page
Loading...
