Winix AW107 - Auto Mode

1211
Operation
❺ Push POWER button.
❹ Plug the power cord into a power outlet.
❻ The air washer will start in Auto Mode
and the PlasmaWave
TM
function will be
ON. If the Low Water Indicator is on,
refill the water bucket.
AUTO MODE
❶ Push FUNCTION button to select Auto
mode.
󳢯 The FUNCTION button will cycle the unit between
the following: LOW
󳥕 MEDIUM 󳥕 HIGH 󳥕
SLEEP MODE 󳥕 AUTO MODE.
❷ AUTO Mode Indicator will illuminate.
󳢯 Fan and disk speed will automatically adjust,
according to chart below, for optimal humidity
level of around 50%.
❸ Push the POWER button to turn off.
󳢯 All lights will be off.
Fan speedHumidity Range
More than 60% LOW
MEDIUM
HIGH
From 50% to 59%
Less than 50%