9-9
SECTION 9 –
FURNITURE AND SOFTGOODS
2. Lift edges of the dinette cushions up and push
the dinette table straight down. Make sure the
table is lowered as far as it will go so when
arranging the cushions to cover the bed area,
they are even with the other dinette cushions.
NOTE: You may find it easier to remove the
dinette cushions completely before
lowering the table, especially if just one
person is converting the dinette into bed
position.
3. Secure both latches on the table leg to lock in
lowered position.
4. Arrange cushions to cover bed area.
NOTE: Use the back dinette seat cushion and
two bolster cushions to cover the dining
table.
Reverse steps to reassemble to dinette
configuration. Once the table is up, secure both
latches on the table leg.
PLEATED BLINDS
–If Equipped
Your coach may feature pleated window
blinds for nighttime privacy and daytime room
darkening purposes.
They are raised or lowered by grasping the
bottom edge of the blind and moving it up or
down by hand.
Failure to engage both latches when the
table is raised may result in injury.
To Next Page
Loading...
Need help?
General
