SECTION 1
SAFETY PRECAUTIONS
1-8
2. Your smoke alarm will not work without
power. Never remove the battery to quiet the
alarm. When your smoke alarm “beeps”
about once a minute the battery is weak.
Install a new battery immediately. Be sure to
use only batteries specified in manual or on
unit. Test unit after installing a new battery.
3. Clean and vacuum the openings on your
smoke alarm once a month.
4. Do not open the smoke alarm or try to repair
it. For replacement information see warranty
in Owner’s Manual.
5. Smoke alarms have technical limitations and
may not respond in all situations. FIRE PRE-
VENTION is your best safeguard.
See your InfoCase for further information.
Press to
test
To Next Page
Loading...
