Winnebago Sunflyer - Instrument Panel Gauges and Controls

SECTION 2
DRIVING YOUR MOTOR HOME
2-12
necessary to recalibrate the compass when you
change zones.
SPECIFICATIONS
Power Sunvisors - Optional
The powered sunvisors are controlled by
switches on the driver and passenger armrest
panels. The drive side contains switches for both
sides to allow driver control. The passenger side
has a switch only for the passenger side visor.
Press and hold DOWN side of the switch to
extend
Always be careful to position visors so they do
not impair the driver’s forward vison or sideview
mirror vision.
INSTRUMENT PANEL
GAUGES AND CONTROLS
The illustrations on the following page show-
ing switches and features provided by Winneba-
go Industries.
See your chassis owner's manual for detailed
information on the instrument gauges, steering
column controls, brakes, and other chassis origi-
nal equipment.
Parameter Min
Avg
Typ
Max Units
Operating Voltage 9 12 18 Volts
Operating Temperature -40 - 85 °C
Storage Temperature -55 - 105 °C
Supply Current @12V
Active Mode
Sleep Mode
0.3
0.001
Amps
Amps
Compass Accuracy +/-5 Degrees
Compass Resolution 45 Degrees
Temp. Measurement
Accuracy +/-1 °C
Temperature Display -40
-40
127
53
°F
°C
Compass zones for the U.S.