Winters DPG - Setup Options; Auto;Manual Shut Off Modes; Display Modes

DPG
Digital Pressure Gauge Instructions
WINTERS INSTRUMENTS Tel: 1-800-WINTERS / www.winters.com
MKT5164
12/17
Setup Options
Hold Menu Button for about 6 seconds
A) Press Menu Button and Display will show “OFF=0”. This selects the Auto or Manual Shut O󰀨 modes. Press Power
Button to select “0” or “1”.
OFF=0: Auto Shut O󰀨 mode; Display automatically shuts OFF after about 1 minute
OFF=1: Manual Shut O󰀨 mode; Display will remain constantly ON until Shut O󰀨 manually (the life of the batteries is about
15 days).
B) Press Menu Button and Display will show “HL=0”. This selects the Display mode. Press Power Button to select “0” or “1”.
HL=0: Display shows actual and continuous process pressure
HL=1: Display shows only peak process pressure*
C) Press Menu Button to return to process pressure display
* Gauge needs to be cycled ON/OFF to be reset