STEP 9:
Please wait a moment until the webpage message countdown is
complete and Saved Successfully!
This completes the setting of Satellite.
If you have several routers to set as Satellite, repeat steps 7, 8, and
9.
STEP 10:
How to add Satellite Router to Mesh network system?
After the Router is powered on, press the WPS button of the Master
/ Satellite Router simultaneously for 5 seconds. The Wi-Fi indicator
will start blinking, and the Satellite will be added to the mesh
network now! You can add more Satellites in order!
» Note: Easy adding satellite devices - Just click WPS together!
» Tips: Just click the WPS of any one device in the mesh system and click the
added one together!
To Next Page
Loading...
Need help?
General
