Wisi OV 75M User Manual

- 1 -
Betriebsanleitung
Operating instructions
WISI TOPLINE HEADEND
OV 75M Grundmodul / Basic module
- Statischer / statically Remultiplexer REMUX (XX11)
2)
- Dual QAM channel transmodulator - mit/with NIT
1)
CS 76 (XX21)
2)
ohne/without NIT (XX31)
2)
- COFDM channel transmodulator (XX41)
2)
- Dual QAM channel transmodulator - mit/with CI, NIT, Service-Filter (X061)
2)
- Dual COFDM channel transmodulator - mit/with CI, NIT, Service-Filter (X071)
2)
1. Durchschleifeingang F
Looped-through input F
2. Durchschleifausgang F
Looped-through output F
3. Optional / Option
abhängig vom Eingangsmodul
dep. on input module
4. Programmier-Schnittstelle
Mini-DIN
Programming interface
5. Befestigungsschraube
Fixing screw
6. Anzeige / Display
7. Bedienfeld / Control panel
8. DC-Versorgungsstecker
DC connector
 2 module slots for input modules
3)
- DVB-S, - DVB-S2,
- DVB-T, - DVB-C,
- Audio/Video Encoder, - ASI in-/ output,
- ASI dual input, - Fast Ethernet input (IP)
- SDI
 Integrated stuffing unit for constant output data rate
 Integrated transportstream (SI, NIT) handling
 Output configuration loop/single switchable
 Connector for remote management (OV51A / 52).
1)
256 PID filter, NIT handling, Stuffing with PCR correction
2)
Refer to ordering informations
3)
Factory setting!
3
4
5
6
7
1
2
8
 2 Modulsteckplätze zur Aufnahme der Eingangsmodule
3)
- DVB-S, - DVB-S2,
- DVB-T, - DVB-C,
- Audio/Video Encoder, - ASI in-/ output,
- ASI dual input, - Fast Ethernet input (IP)
- SDI
 Stuffing zur Einstellung einer konstanten Ausgangs-
Datenrate
 Transportstrom (SI, NIT) Handling
 Einzel -/ Durchschleifbetrieb schaltbar
 Anschluß für Remote management (OV51A / 52)
1)
256 PID-Filter, NIT-Bearbeitung, Stuffing mit PCR-Korrekt.
2)
siehe Bestellinformationen
3)
Im Werk voreingestellt!
046 319 b
Upgrade: www.wisi.de - Service - Download (password login)

Wisi OV 75M Specifications

General

Brand	Wisi
Model	OV 75M
Category	Antenna
Language	English

Summary

WISI TOPLINE HEADEND OV 75M Basic Module

Dual QAM Module Configuration

Remux-QAM Module Configuration

Input and Output Parameter Settings

Configuring transponder selection, output level, and modulation parameters.

COFDM Remux Mode Configuration

COFDM Hierarchical Mode Configuration

COFDM NonHierarchical Mode Configuration

COFDM DVB-T-Repeater Mode Configuration

Frontend and Output Parameter Settings

Configuring mode, output frequency, and attenuation for DVB-T repeater mode.

Dual QAM with CI Module Configuration

Dual COFDM with CI NonHierarchical Mode Configuration

Input, Program Selection, and Output Settings

Configuring CI, source, programs, output parameters, and modulation.

Input Module Specifications: DVB-S

DVB-S Module Settings and Quality

DVB-S module settings, including Sat-IF, Symbol Rate, and Bit Rate quality.

DVB-S2 Module Settings and Quality

DVB-S2 module settings, including Sat-IF, DVBmode, and Bit Rate quality.

Input Module Specifications: DVB-T

DVB-T Module Settings and Quality

DVB-T module settings, including frequency, bandwidth, mode, and Bit Rate quality.

Input Module Specifications: DVB-C

DVB-C Module Settings and Quality

DVB-C module settings, including frequency, QAM mode, and Bit Rate quality.

Input Module Specifications: AV-MPEG

AV-MPEG Module Settings

AV-MPEG module settings for video and audio input parameters.

Input Module Specifications: ASI

ASI Module Settings

ASI module settings for input/output and loop configuration.

IP Input Module Specifications

IP Frontend Configuration

SDI-MPEG Input Module Specifications

SDI Frontend Configuration