Need help?Do you have a question about the Wisi Tangram GT31 and is the answer not in the manual?
General| Gain | Adjustable |
|---|---|
| Power Supply | 100-240 VAC, 50/60 Hz |
| Input | DVB-S/S2, DVB-T/T2, DVB-C |
| Output | IP |
| Protocols | UDP, RTP, HTTP |
| Frequency Range | 47 - 1002 MHz |
| Operating Temperature | 0°C to +45°C |
| Dimensions | 44 mm |
Guidance on handling electrostatic sensitive devices to prevent damage.
Visual overview of the front panel connectors and indicators of the GT31 module.
Instructions for physically installing Tangram GTxx modules into the chassis.
Details on the front-side GigE ports on the Tangram chassis.
Description of the rear module slots and hardware configuration of the Tangram chassis.
Steps and guidance for configuring the Tangram chassis via its web interface.
Information on registering modules and activating software options.
Guide to registering Tangram modules with the WISI portal for activation.
Setting up DVB stream sources and input parameters.
Managing services, including selection, filtering, and PIDs.
Using the GT42 module for service decryption with CI slots.
Configuration of overall Tangram module settings via the SETTINGS tab.
Viewing serial number, hardware revision, name, location, and description.
Information on module uptime and current temperature.
Information on where to find updated documentation and guides.
To Next Page
