©WISI Communications GmbH & Co. KG
GT31W Tangram Frontend DVB-S / S2 / C / T / T2 – IP Gateway
Content
1 Safety and Agency Approvals ............................................................................................................... 1
1.1 Legal Reference and Safety Standards ......................................................................................... 2
1.2 Electrical Safety ............................................................................................................................ 2
1.3 ESD Protection .............................................................................................................................. 2
2 Assembling and connecting cables ....................................................................................................... 2
2.1 Assembling the GT-modules ......................................................................................................... 2
2.2 Connecting cables ......................................................................................................................... 3
3 Connecting to the TANGRAM Web UI .................................................................................................. 3
3.1 Default IP address – connection via GT11 .................................................................................... 3
3.2 Changing IP address – directly connection to the module ........................................................... 4
4 Important information and maintenance ............................................................................................ 4
4.1 Operating System notes ............................................................................................................... 4
4.2 Article Numbers – Spare Parts ...................................................................................................... 4
5 Service and Support .............................................................................................................................. 4
NOTE:
This Quick Guide is used primarily for commissioning the unit at start-up by providing the parameters
necessary to start operation. Details for mechanical information, safety information, configuration
and handling of these products are provided in the manual and configuration guide.